We have a GM 502 Rotating Assembly in excellent condition with about 10 hours on it. It has a forged crankshaft, rods and pistons. The rod bearings and rings are in excellent condition.

We are asking $800 or best offer. There are 2 availiable.

Call us at 803-499-2292 or 803-468-1114

302 cubic inch small block ford  . 040 over 12.5 -1 comp. solid lift comp. cam windsor jr heads (steel) 2.02 intake 1.60 exhaust valves port & polished with harland sharp roller rocker arms screw in studs & guide plates comp. push rods eagle crank & rods  fluid dampner . sfi flrx plate victor jr intake also ported & polished to match cyclinder heads  750 cfm hp holly carb double roller timing chain gears head studs with felpro multi layer steel head gaskets 175 hp nitrous kit adjustable from 100 - 175 fuel cell 10 gal barry grant 220 fuel pump all new braided  lines & fittings  msd dist . wires 6al box with 2 step studder box line lock c4 trans . with kevlar bands & clutches bte parts with reverse pattern valve body  trans break  after market comp built drive shaft . hurst shifter 3500 stall t.c.i  converter  headman headers electric areo space water pump  frame connectors 6 pt roll cage 5 pt racing harness 4 inch cowl hood electric fans new radiator drive shaft loop 9 inch ford with 457 gears full strange pool strange 31 spline axels  has front limited straps front disk brake conversion 12 inch rotors with 4 piston calipers  new front trick coil springs 90 -10 drag shocks with a trans cooler comp. eng. traction bar slider links 15x3 drag stars 15x10 drag stars with 26 x10 x15 m-t  new slicks  complete front suspension has all new parts  recently painted 2010 ford konan blue pictures do the car no justice must see on sunny day  all machine work done by naylor racing engines    car is super fast   good looking   thanks

Brand New - Part #61909

Edelbrock Performer LT1 Cylinder Heads
Cylinder Head, Performer LT1, Aluminum, Assembled,

54cc Chamber, 170cc Intake Runner, Chevy, 5.7L, LT1

Summit Price $1439.00

540-632 BBC SHORT BLOCKS STARTING $4566.00

383-434 SBC SHORT BLOCKS STARTING $3790.00



  WE OFFER QUALITY SHORT BLOCKS AND ENGINES WITH WARRANTY!!!

ALL PARTS ARE NEW AND NO BLEMS!!!!!!

540-600 CID BBC SHORT BLOCKS
DART BIG-M BLOCK 9.800 - 10.200
EAGLE 4340 CRANKSHAFT 4.250- 4.375-4.500-4.750
EAGLE 4340 ARP 2000 H BEAM RODS
J.E-DIAMOND-SRP-MAHLE PISTONS DOME OR F.T
J.E PISTON RINGS
J.E PISTON PINS
CLEVITE 77 H RACE ROD BEARINGS
CLEVITE 77 RACE MAIN BEARINGS
DART (COATED) RACE CAM BEARINGS
DART BRASS FREEZE PLUGS (INSTALLED)
BALANCED
BORED AND HONE WITH PLATES
DECKED TO 9.800 OR 10.200 OR ZERO DECK
JET WASH AND HAND CLEANED
CK ALL CLEARANCES
FILE FIT RINGS FOR H.P OR NOS (ECT)
FULL ASSEMBLY
FREE ENGINE STAND TO SHIP ON
 
EAGLE 540-600 CID BBC $4570.00
EAGLE 632 CID BBC $4885.00
 
SHORT BLOCK WITH MANLEY 4340 PARTS!!!

MANLEY 540-600 CID BBC $4705.00
MANLEY 632 CID BBC $5005.00
MANLEY 632 (HAS GAS PORTED PISTON AND THEY WILL FIT BRODIX HEAD HUNTER HEADS WITH NO WORK TO 44CC DOME PISTON GOOD FOR A LOT OF NOS OR H.P)

350-434 SMALL BLOCK CHEVYS

DART SHP BLOCKS
EAGLE 4340 3.480-4.000 CRANKSHAFT
EAGLE 4340 ARP 2000 H BEAM RODS
J.E-DIAMOND-SRP-MAHLE RACE PISTONS
J.E RACING RINGS
J.E PISTON PINS
CLEVITE 77 H RACE ROD BEARINGS
CLEVITE 77 H RACE MAIN BEARINGS
DART (COATED) CAM BEARINGS
DART BRASS FREEZE PLUGS (INSTALLED)
ALL MACHINE WORK ABOVE DONE TO ALL ARE SHORT BLOCKS AND ENGINES.

EAGLE 350-406 CID SBC $3790.00
EAGLE 434 CID SBC $4005.00
 
MANLEY 350-406 CID SBC $3875.00
MANLEY 434 CID SBC $4075.00
 
FREE SHIPPING STAND

WE HAVE ANY TYPE OF HEADS YOU NEED FOR THESE SHORT BLOCKS WE CAN HELP WITH PICKING THE RIGHT HEADS FOR YOUR RACING NEEDS.

IF YOU NEED A COMPLETE ENGINE WE OFFER A WIDE RANGE OF RACING  ENGINES (JUST CALL WE CAN HELP) 



NAYLOR RACING ENGINES - 803 499 2293 OR 803 468 7879

BIG M SPORTSMAN BLOCKS:

$1785.00 FOR 4.250 BORE

$1835.00 FOR 4.500-4.600 BORES
BIG M BLOCKS W/STEEL BILLET MAIN CAPS:

$2105.00 FOR 4.250 BORE

$2165.00 FOR 4.500-4.600 BORES

CALL FOR THE BEST PRICES ON ALL DART BLOCKS AND HEADS

COMPLETE ENGINE JUST PUT IT IN THE CAR AND HIT THE STARTER!!

THIS ENGINE WILL RUN 5.50S ON H.P AND 4.90S ON 300 SHOT OF NOS!!!

DART BLOCK
MANLEY 4.00 4340 CRANKSHAFT (1500 H.P)
MANLEY 6.00 2000 RODS (1500 H.P)
DIAMOND CUSTOM PISTONS 4.155 BORE 1.025 C.H GAS PORTS
TOTAL SEAL .043-.043NAP-3MM STD (NOS AP STEEL)
TREND TOOL STEEL .170 WALL PINS
CLEVITE H RACE ROD BEARINGS
CLEVITE H RACE MAIN BEARINGS
DART COATED CAM BEARINGS
COMP 4-7 SWAP ROLLER CAM FOR NOS
COMP ENDURE X LIFTERS
JESEL BELT DRIVE
ATI BALANCER
MOROSO DRAG OIL PAN
MOROSO OIL PUMP
BRODIX WP 18 SP C AP FULLY CNC WITH 2.200 INTAKE VALVES
PACK 1.640 SPRINGS 350 SEAT 980 OPEN .900 LIFT
PRO TWO PIECE INTAKE 4500 TOP
JESEL SHAFT ROCKERS 1.75 - 1.65
ARP HEAD STUDS
MATON 3/8 .165 WALL PUSH RODS
SCE COOPER HEAD GASKETS
SCE INTAKE GASKETS
SHEET METAL VALVE COVERS
NOS FOGGER 300 SHOOT (FLOW TESTED)
HOLLY ULTRA H.P 1050 L.W
MSD BILLT DIST (LOCKED)
MSD BRONZE GEAR
SCOTTS 8.8 WIRES WITH FIRE SLEEVES
NGK 10 SPARK PLUGS
MOROSO WATER PUMP
POWERMASTER STARTER
SFI FLYWHEEL
ARP FLYWHEEL BOLTS
CARB GASKET
HEADER GASKETS
CARB STUDS
SHIPPING STAND

WILL HELP WITH NOS TUNING INFO AND TRACK TUNING AT NEAR BY TRACK.

IF YOU NEED ANY MORE INFO PLEASE LET ME KNOW.

THANK YOU
JIMMY

NAYLOR RACING ENGINES 803 499 2293 / 803 468 7879

RACE ENGINE PARTS 803 499 2292 / 803 468 1114